Resin Infusion

Resin Infusion. Resin infusion when done correctly can produce parts of incredible strength and quality of appearance The combination of vacuum pressure along with carefully placed vacuum consumables (such as peel‐ply and infusion.

Resin infusion is a composite moulding process whereby the liquid resin is drawn a stack of dry fabrics by the aid of vacuum pressure and in doing so impregnates the laminate We have applied resin infusion techniques for a wide variety of composite parts and tooling where it suits the process.

Resin Infusion Starter Kit Easy Composites

Benefits of The Infusion ProcessWhat Are The Limitations of Infusion?Other Names For Resin Infusion and Related Vacuum ProcessesCritical Elements of The Infusion ProcessLow investment cost  Typically little more investment than that required to make composite parts using hand layup in open mouldsCapable of producing minimum weight high performance laminates with properties comparable to those of laminates produced by more expensive processes such as autoclave cured prepregInfusion allows the reinforcement materials to be handled dry  This avoids the need for laminators to have contact with the resin significantly reducing workforce exposure to the resin  AllergicThe process is carried out within a “closed” system that is within the void between a sealed bag and a mould or between 2 sealed moulds  Hence there is minimal exposure of the uncured resin to t Infusion is a relatively slow manufacturing process  It is usually not worth considering for applications requiring high production rates where another manufacturing solution is feasibleFor oneoff or large parts where multipleuse flexible films or top moulds are not practical or are prohibitively expensive the process can result in considerable waste (vacuum bag film resin tu Double (flexible) bag infusion  A process where one vacuum level is applied to the reinforcement positioned between the mould and an inner flexible bag and a second vacuum level (usually a higherDVB process  In the NASA developed double vacuum bag process a rigid perforated shell is interposed between 2 flexible bags  Separately controllable levels of vacuum may be applied to the inner bCAPRI process  Controlled Atmospheric Pressure Resin Infusion  This is a version of infusion patented by Boeing Aircraft CoClosed moulding  This is a general term covering a wide range of composite manufacturing processes conducted within some form of enclosed space eg between a rigid mould and a flexible film or A stack of DRY material(s) to be laminated is placed in a LEAKTIGHT mouldA LEAKTIGHT flexible film (commonly known as a vacuum bag) is placed over the laminate and SEALED to the mould beyond the perimeter of the laminate  Where multiples of the same part are to be madA minimum of two connections are made to the bag one to permit air to be removed from the cavity between the bag and the mould and the other to allow liquid resin to enterWith the resin entry line temporarily CLOSED the cavity between the bag and the mould is evacuated by a vacuum pump  The level of vacuum necessary will vary depending on the permeability of the m.

Intoduction to the resin infusion (or vacuum infusion) process

Resin Infusion is a process by which vacuum draws resin into a dry fiber laminate in a one sided mold A rigid or flexible film membrane is placed over the top and sealed around the mold periphery Resin infusion is considered a “Closed Mold Process”.